Bluelab IntelliDose Kit Automatic Fertigation Controller for All Growing Methods with pH and Electrical Conductivity Balancing and Wi-Fi for Distance Monitoring

Automate your hydroponics system nutrient dosing or soil cultivation irrigation while maintaining your preset EC and pH settings. 
Dose up to a 9 part blend of nutrients, additives and pH adjuster or run up to 4 irrigation lines with a 5 part blend.
The 4 irrigation stations set up allows different areas of your grow space to be watered on different schedules. One reservoir or a pump feeding each station at different times may be used. The system can be instructed to only irrigate during day time or your preferred time.
Peristaltic pumps allow all your nutrient reservoir tanks to be on the ground, permitting the availability of much larger stock quantities of pre mixed solution, lowering the chance of leaks and cutting down labour.
Any line of liquid or powder nutrients may be used, simply determine your dilution ratios and the system will keep the reservoir at your perfect recipe at all times.
Adjustable to suit your preferred cultivation method whether you use nutrient film technique NFT, deep water culture, a batch dosing system or soil agriculture.

Product features:

• Intelligent control of all growing methods NFT, DFT, DWC, soil, media, drip and aeroponics.
• For reservoir capacities of up to 24 000 US gal/ 90 800 L.
• Doses up to nine nutrient concentrates, additives and pH regulators.
• Four 24 VDC outputs available for irrigation.
• Automatically adjusts pH and electrical conductivity to set targets.
• Displays EC, CF, TDS, °C, °F, pH.
• Large interactive screen allows you to easily maneuver between calibrating, set points, alarms, and configuration. 
• Set different electrical conductivity EC levels for day and night.
• Water level control to lower EC.
• Sequential pump control allows each additive time to mix.
• Proportional dosing rapidly adjusts between irrigations.
• Sonor alarms when a reading deviates outside adjustable set limits and dosing lockouts prevent overdosing or running dry.
• Remote monitoring and control, instant alarms to your phone and history reporting to assist data driven decision making with the Edenic app, internet access and an IntelliLink added on. Access real time information about your cultivation, trigger irrigation events or change dosing levels from anywhere.
• Activate pH up or down adjusters with external pumps connected.
• Manage and automate up to 9 Peristaltic pumps.
• Control 120 VAC or 240 VAC pumps, heaters and chillers on a timer, when connected to a Power Relay.

Technical specifications:

• Operating environment temperature range: 0°C to 50°C or 32°F to 125°F (not in direct sunlight).
• pH dosing lockout: below 4.5 or above 8.0.
• Nutrients dosing lockout: below 0.1 EC/ 1 CF/ 50 ppm or above 6.0 EC/ 60 CF/ 3000 ppm.
• Nutrient measurement resolution: 0.1 EC, 1 CF, 5 ppm.
• pH measurement resolution: 0.1 pH.
• Dissolved nutrient ionic electrical conductivity measurement units: EC, CF, TDS 500 or TDS 640 or TDS 700.
• pH measurement range: 2 to 12 pH.
• pH dosing range: 4.5 to 8 pH.
• Nutrient ionic conductivity measuring range: 0.1 to 9.9 EC, 1 to 99 CF, 50 to 4900 ppm.
• Nutrient dosing range: 0.1 to 5.9 EC, 1 to 59 CF, 50 to 4900 ppm.
• Temperature range: 0°C to 50°C / 32°F to 125 °F.
• Electrical conductivity measurement accuracy: ± 0.1 EC, ± 1.0 CF or ± 50 ppm (temperature compensated).
• pH measurement accuracy: 0.1 pH
• Temperature measurement accuracy 1 °C / 2 °F.
• Power: 9 outputs 24 VDC (or same voltage as supplied by plug pack). Power source 100 to 240 VAC into plug pack (supplied) with 24 VDC output for device.
• Nutrient and pH dosing times can be set from 0 min to 254 min.
• Dosing interval can be set from 0 min to 254 min continuous dosing.
• Sequential dosing to prevent power surges.
• Access more detailed information in the user manual.
• CE, FCC and RoHS compliant.
• Country of Origin: New Zealand.

In the box: