1 4

The early bird gets the worm. Get ready for the coming season.

Toro Irrigation 700 Series Ultra Flow Valves

Toro Irrigation 700 Series Ultra Flow Valves

$4,314.00 CAD
$4,314.00 CAD
セール 売り切れ
配送料はチェックアウト時に計算されます。

Valve for low flow applications found in nursery and greenhouse drip irrigation. Straight through flow path provides low pressure loss and superior regulating capabilities. 

Available in ¾", 1", 1 ½" and 2" (1.9 cm, 2.5 cm, 3.8 cm, and 5 cm).
Working pressure range from 10 psi to 150 psi (0.7 bar to 10.3 bar).

Features

  • Unique straight through flow path
    Provides extremely low friction loss.
  • Slow closing design
    Reduces water hammer and resulting stress on the system.
  • Internal and external bleed (flush mode)
    Manual operation.
  • Tough glass reinforced nylon, stainless steel and brass
    Provides durability and long life.
  • High and low flow operation
    Ensures consistent performance in a variety of applications.
  • Self flushing, 150 mesh, stainless steel filter screen on 1, 1½ and 2 inch models
    Provides consistent operation.

Added Features

  • Manual internal bleed.
  • Wide flow range.
  • Flow control allows precise flow adjustment and manual shutoff (not available on ¾ inch model).
  • Compact, low profile design.
  • Rugged nylon reinforced Buna-N diaphragm provides leak proof seal.
  • Buna-N valve seat seal.
  • Encapsulated injection molded solenoid with a captive hex plunger.
  • Unique three way stainless steel bonnet screws with threaded brass inserts accept Phillips, flat blade and hex driver tools.

Operating Specifications

  • Flow range: 0.1 gpm - 180 gpm.
    (700B-.75 and 700-1 can operate at 0.1 gpm)
  • Pressure range: 10 psi - 150 psi.
    (700-2 not recommended under 20 psi)

Electrical Specifications

  • Solenoid: 24 VAC.
  • Inrush volt-amp: 24 VAC - 9.6 VA.
  • Inrush current: 0.4 amp.
  • Holding volt-amp: 24 VAC - 4.8 VA.
  • Holding current: 0.2 amp.

Models

 Model Internal bleed
flow control		 Fitting Flow rate
gpm		 Pressure
psi
A-700B-.75 ¾'' FPT 0.1 - 30 10 - 150
A-700-1 1'' FPT 0.1 - 50 10 - 150
A-700-1.5 1½'' FPT 15 - 40 10 - 150
A-700-2 2'' FPT 18 - 30 25 - 150

 

Pressure Regulation
713 Models

  • Manual downstream pressure regulating valves.
  • Available in 1'', 1.5'' and 2'' models ( 25 mm, 40 mm and 50 mm).
  • Available in in-line and downstream sensing versions, with 20-100 or 0-30 psi (1.4-6.9 or 0-2 bar) range.
  • Self modulating pressure regulator maintains constant downstream pressure within ±2 psi (0.14 bar) of pressure setting, for in valve sensing and within ±1 psi (0.07 bar) for downstream sensing.
  • All flow ranges must be within recommended range indicated on pressure loss chart; minimum 15 gpm (0.9 l/s) recommended for 703 and 713 models.
  • Inlet pressure must be 15 psi (1.03 bar) greater than desired outlet pressure.

Electrical Specifications

  • Solenoid: 24 VAC.
  • Inrush volt-amp: 24 VAC - 11.50 VA.
  • Inrush current: 0.4 amp.
  • Holding volt-amp: 24 VAC - 5.75 VA.
  • Holding current: 0.2 amp.

Optional Accessories

  • Hydraulic conversion kit. (used to convert a standard solenoid operated irrigation valve into a hydraulically operated remote valve)
  • Reclaimed water kit. (recycled and reclaimed water solenoid kit used to convert standard irrigation valves for non potable or effluent water systems)
  • DC Latching solenoid.
詳細を表示する