Toro Irrigation SentryScreen Semi Automatic Suction Scanner Screen Filter

Semi-automatic suction scanners for agricultural operations. Great as primary filter for water with light to moderate debris loads or for coarse water filtration (80 mesh or coarser).

Features:

• Can be cleaned without interrupting the flow or disassembling the filter, saving time and water.
• Reduces down time and labor costs thanks to less frequent cleaning requirements.
• Operational at 15 psi, making it ideal for low pressure applications.

Operation Process:

Water flows through the inlet along and through the cylindrical screen, trapping the solids on the screen. The filter can be manually cleaned while still pressurized and without removing the screen. The operator cleans the screen by opening the flush valve and turning the handle, fully up and then back down. As a result the suction nozzles traverse the entire screen removing trapped debris. The whole process takes a few seconds.

Standard Characteristics:

• Filter element: Stainless steel screen AISI 316 mesh, supported by a PVC cylinder.
• Available filtration grades: from 120 microns.
• Filter housing material of construction: Carbon steel ST37.2.
• Pre-treatment: Sand blasting up to Sa 2.5 grade.
• External & Internal coating: Electrostatic oven baked polyester-epoxy powder coating with a thickness of 150 to 200 microns.
• Connections: VIC, Threaded socket and Flange.
• Maximum recommended working pressure: up to 10 bar / 145 psi.
• Minimum operating working pressure during flushing: 1 bar / 14.5 psi.
• Equipped with a mechanical DP which indicates when he pressure difference of 5m is exceeded.
• Clean screen pressure loss: up to 0.1 bar / 1.45psi.

Specifications: