Toro Irrigation 100 Series Plus Valves

Heavy duty globe and angle valves offering superior performance and durability in the most demanding conditions. Suitable for agricultural, commercial and industrial applications. 

The Irritrol® 100 Series Century Plus is offered in a globe or angle configuration with sizes ranging from one to three inches, featuring a pressure range of 10 to 200 psi, optional modular pressure regulation, stainless steel metering, internal and external bleed, a nylon reinforced Buna-N double beaded diaphragm and an anti contamination design for dirty water applications (available on all 102 models).

Features

• Tough glass reinforced nylon, stainless steel and brass construction
  Withstands high temperatures and system surges under pressure for long term reliability.
• 200 psi pressure rating
  Prevents water hammer and system damage in high pressure installations.
• Internal and external bleed (flush mode)
  Manual operation.
• Externally removable self cleaning metering system
  Provides consistent performance in recycled water applications.
• Accepts OmniReg® modular pressure regulator
  Ensures consistent performance.

120 Anti Contamination Models

• 150 mesh external control water filter and three way solenoid
  Provides non continuous metering for recycled water applications.
• Selectable normally open or normally closed mode (factory set at normally closed)
  Provides flexibility.
• Control water filter
  Allows easy external service.

Operating Specifications

• Flow range: 5 gpm - 300 gpm.
  
• Pressure range: 10 psi - 200 psi; 10 psi - 100 psi (102 models)
  

Electrical Specifications

• Solenoid: 24 VAC.
• Inrush volt-amp: 24 VAC - 9.6 VA.
• Inrush current: 0.4 amp (102 models: 0.48 amp).
• Holding volt-amp: 24 VAC - 4.8 VA.
• Holding current: 0.2 amp (102 models: 0.24 amp).
  

Note: DC latching solenoid is not compatible with 102 anti contamination models. Allows easy external service.

Models

Globe electric 24VAC and 12VDCL internally ported, normally closed valves with manual bleed assembly and adjustable flow control.

Optional Accessories

• DC latching solenoid
  Note: Maximum pressure for a valve that utilizes latching solenoid is 120 psi.
• Weatherproof gauge.

Pressure Regulation
213 Models

• Manual downstream pressure regulating valves.
• Available in downstream sensing in  20-100 or 0-30 psi (1.4-6.9 or 0-2 bar) ranges.
  
• Self modulating pressure regulator maintains constant downstream pressure within ±2 psi (0.14 bar) of pressure setting, for in valve sensing and within ±1 psi (0.07 bar) for downstream sensing.
• All flow ranges must be within recommended range indicated on pressure loss chart; minimum 15 gpm (0.9 l/s) recommended for 103 and 213 models.
• Inlet pressure must be 15 psi (1.03 bar) greater than desired outlet pressure.

Electrical Specifications

• Solenoid: 24 VAC.
• Inrush volt-amp: 24 VAC - 9.6 VA.
• Inrush current: 0.4 amp (102 models: 0.48 amp).
• Holding volt-amp: 24 VAC - 4.8 VA.
• Holding current: 0.2 amp (102 models: 0.24 amp).

Optional Accessories

• Hydraulic conversion kit. (used to convert a standard solenoid operated irrigation valve into a hydraulically operated remote valve)
• Reclaimed water kit. (recycled and reclaimed water solenoid kit used to convert standard irrigation valves for non potable or effluent water systems)
• DC Latching solenoid.