Toro Irrigation SentryScreen Manual Circulating Filter

Primarily suitable for in-line control or as back up filtration at the control valves in the field, where manual flushing is practical. For applications with light to moderate sand.

The water enters the filter through a plate with four or six angular holes, directing the flow in a circular pattern along the length of the filter element. The water flows through the element screen openings while solid particles are collected at the lower section of the filter. These particles can be easily removed by opening the drain valve for a short period of time.

The filters are supplied with 4 to 6 plugs, enabling the user to adjust the number of holes to suit the filtering flow rate.

Features:

• Filter element: Stainless Steel screen AISI 316 mesh, supported by a PVC cylinder.
• Available filtration grades: From 120 micron.
• Filter housing construction material: Carbon Steel ST37.2.
• Pre-treatment: Sand blasting up to Sa 2.5 grade.
• Exterior & Interior coating: Electrostatic oven baked polyester-epoxy powder coating with a thickness of 150-200 microns.
• Connections: VIC, Threaded socket and Flange.
• Maximum pressure: 10 bar / 145 psi.
• Maximum recommended working pressure: Up to 8 bar / 116 psi.
• Optional: Automatically controlled drainage valve (programmed by time).

Specifications: