The early bird gets the worm. Get ready for the coming season.
Toro Irrigation SentryCyclone Hydrocyclone Sand Separator - Sedimentation Tanks Only
Toro Irrigation SentryCyclone Hydrocyclone Sand Separator - Sedimentation Tanks Only
Не удалось загрузить сведения о доступности самовывоза
Sand separator for well water applications, rivers, and canals with moderate to high levels of sand and silt.
The hydrocyclone separators are designed for the most challenging of agricultural, greenhouse and nursery applications. These manual filter units are ideal for well water, rivers and canals, removing large volumes of suspended material such as sand or other heavy debris.
Features:
- Tapered shape of the body maintains high velocity of the water and particles during the separation process, forcing the particles to the bottom of the hydrocyclone.
- Underdrain. The shape changes the direction of the particles, causing them to settle in the chamber, while the valve on the lower chamber allows for easy periodic flushing of the accumulated particles.
- Rubber cone increases the efficiency of the separator by extending the shape of the hydrocyclone down into the lower chamber, and provides protection to the lower neck of the hydrocyclone.
- Multiple unit manifolding. The tapered shape of the hydrocyclone allows for close spacing on a manifold, ideal for applications where a number of smaller units are required.
Operation Process:
Water enters via the inlet creating a spiral flow. Centrifugal force separates the dirt particles from the water and pushes them towards the walls of the separator. Particles gravitate downwards and into the debris collector, while water moves upwards and exits via the outlet. The debris collector is drained simply by opening a flush valve for a few seconds. Available from 1" to 8" inlet/outlet configurations.
Standard Characteristics:
- Filter housing material of construction: Carbon steel ST37.2.
- Pre-treatment: Sand blasting up to Sa 2.5 grade.
- External & Internal coating: Electrostatic oven baked polyester-epoxy powder coating with a thickness of 150 to 200 microns.
- Connections: VIC, Male Threaded and Flange.
- Maximum recommended working pressure: 10 bar / 145 psi.
- Inlet is tangential to the body.
- Equipped with anti-vacuum valve.
